DSMTalk Forums: Mitsubishi Eclipse, Plymouth Laser, and Eagle Talon Forum banner
Cancel
Create thread New Garage Forums

I was told this is a jdm intake manifold.. (pic)

Jump to Latest
1 - 20 of 22 Posts

4g63tcrazy

· Registered
Joined
·
1,622 Posts
Discussion starter · #1 ·
Ok, Now i've been searching for the last half hour trying to find a pic of this manifold and info, but I can't. ( Maybe i'm not searching the right terms or something.) I found a couple but all it says is jdm. Is this manifold that I have any better than stock? If someone can give me some info about this manifold I would really appreciate it! Thanks.

Image
 
Save
Reply Quote Like Like
Discussion starter · #3 ·
It's definitely not the 2g. The 2g has the sensor sitting on top and the coil pack is not mounted there. Also there is a vac port that would be seen to the top right but there's not. Also the 2g one necks down after the flange for the TB. I know this might not be the best pic. I will see if I can find a better one.
 
Save
Reply Quote Like Like
#4 ·
whats your goal with that manifold ?
 
Save
Reply Quote Like Like
Discussion starter · #7 ·
90BlueGSX said:
whats your goal with that manifold ?
Click to expand...
Nothing.. Just curious to see if it's any good. Don't plan on using it unless it's any good. That's why I'm asking, I got it for free. After searching over on tuners I found that's it's for a 2g and it's an evo3 IM. The runners are I think 2 inches shorter than stock and has the same size TB flange as a 1g. (60mm) People say it flows pretty good for the price on a 2g. I have it for sale in one of my threads and I was wondering if I should sell it or not.. But it's for a 2g so it's still for sale. Cheap too!:banana:
 
Save
Reply Quote Like Like
#8 ·
4g63tcrazy said:
Nothing.. Just curious to see if it's any good. Don't plan on using it unless it's any good. That's why I'm asking, I got it for free. After searching over on tuners I found that's it's for a 2g and it's an evo3 IM. The runners are I think 2 inches shorter than stock and has the same size TB flange as a 1g. (60mm) People say it flows pretty good for the price on a 2g. I have it for sale in one of my threads and I was wondering if I should sell it or not.. But it's for a 2g so it's still for sale. Cheap too!:banana:
Click to expand...
Blocked off EGR (lower left side of manifold pic) is a dead give away that it is a JDM manifold. I have one for sale as well.
 
Save
Reply Quote Like Like
#13 ·
If you saw how small the TB was that came with mine you would not consider it at all.
 
Save
Reply Quote Like Like
Discussion starter · #15 ·
The ending conclusion is that it's a evo intake manifold as kitty said and it's a good upgrade for a 2g. The TB opening I believe is 60mm like a 1g. I have the TB that came with it and I know for a fact it is the same, if not bigger than the 1g TB.
 
Save
Reply Quote Like Like
#16 ·
It must be off an evo 3. Mine came off a JDM galant. Automatic. Still had 450cc injectors though.
 
Save
Reply Quote Like Like
Discussion starter · #19 ·
KnightRyderx2 said:
I am going to correct myself on this one, it uses a 70mm coupler... So the early evo TB is close to that if you are measuring the inside of it.
Click to expand...
The TB is about 70mm? DAMN! When I get home I'm gonna measure mine and see. If it is, I'm using it!
 
Save
Reply Quote Like Like
Discussion starter · #20 ·
I just went out to my shed to check the size of the TB. It happens to be 64mm almost 65. I'm not sure if I should use it since it doesn't have the idle switch that my 1g has. What do you guys think?
 
Save
Reply Quote Like Like
1 - 20 of 22 Posts
About this Discussion
21 Replies
10 Participants
Last post:
4g63tcrazy
DSMTalk Forums: Mitsubishi Eclipse, Plymouth Laser, and Eagle Talon Forum
posts
2.3M
members
104K
Since
2000
A forum community dedicated to Mitsubishi Eclipse, Plymouth Laser and Eagle Talon owners and enthusiasts. Come join the discussion about performance, turbos, builds, modifications, troubleshooting, maintenance, and more!
Full Forum Listing
Explore Our Forums
General DSM Tech and Tuning Help! Tech Newbie Questions Forum Body Tech and Appearance Electronics Tech