Well my 1g manifold has cracks in it. I tried searching on here for some good cast manifold reviews and what people use for mitsu housing turbo. But could not find anything at all. So what do people upgrade to that are on a budget. I will be running a SBR G60 turbo and a punishment racing 02 housing with a tail 38mm wastegate. What would be a good cast manifold. Any help or reviews would be great thanks.
exhaust Manifolds
dsmvr4
1 - 20 of 21 Posts
Well my 1g manifold has cracks in it. I tried searching on here for some good cast manifold reviews and what people use for mitsu housing turbo. But could not find anything at all. So what do people upgrade to that are on a budget. I will be running a SBR G60 turbo and a punishment racing 02 housing with a tail 38mm wastegate. What would be a good cast manifold. Any help or reviews would be great thanks.
Joined
·
6,783 Posts
You're on a budget?
Ported 2g exhaust manifold.
Ported 2g exhaust manifold.
Joined
·
787 Posts
I have an SBR cast manifold. I would either get that or the fp one.
Depends on what your budget is exactly here is a rough breakdown though.
100 or less ported 2G(works well too)
200 or less EVO 3(solid performer)
300 or so FP Manifold(best performer)what I run
So it's your pick with your budget your decision have fun.
100 or less ported 2G(works well too)
200 or less EVO 3(solid performer)
300 or so FP Manifold(best performer)what I run
So it's your pick with your budget your decision have fun.
Joined
·
149 Posts
The fp is a great manifold, ive been thinking of getting one. I have a ported evo 3 and love it, i would say get a good 2g manifold and port it, cheap easy fun.
Joined
·
212 Posts
I have a non turboed 2g for 50 if you can use it .PM me .
I have a friend that ran a SBR cast that had the port on it and such. It ended up cracking and SBR would not do anything about it. I seen the HAFE has one which is just like the SBR. I also came across one on DSMparts its called a GT DSM High Flow Manifold. Has any one used this before?
I would love to buy the FP one. But i dont think i want to spend $300 for something that in a year i will be replacing with a shearerfab manifold for new setup. I was looking into the EVO3 or at the GT manifold i belive they are both in my price range. Just want to know if the GT one is a good mainfold or just get the evo3 that i know people have been using for a long time.
I would love to buy the FP one. But i dont think i want to spend $300 for something that in a year i will be replacing with a shearerfab manifold for new setup. I was looking into the EVO3 or at the GT manifold i belive they are both in my price range. Just want to know if the GT one is a good mainfold or just get the evo3 that i know people have been using for a long time.
Joined
·
787 Posts
If you are going to change it in a year just get a used 2g manifold. That will be the cheapest one and they have been in the 9's.
Joined
·
11,002 Posts
http://www.slowboyracing.com/estore/product.php?productid=6858&cat=20&page=1
This is the HAFE one you spoke of. Its kinda in the middle on price.
This is the HAFE one you spoke of. Its kinda in the middle on price.
Joined
·
2,818 Posts
If you are just looking to replace yours until you get a ShearerFab one, just got with another 2g or 1g manifold. And if you want, I have a 1g mani I could sell you for dirt cheap if you are interested. Basically just for the cost of shipping. Just PM me and let me know.
Joined
·
135 Posts
GT DSM High Flow Manifold for turbocharger.comdsmvr4 said:
http://www.turbochargers.com/store/product_info.php?products_id=121
I ran tis one on my old car. I had no problems. It worked great .
Joined
·
92 Posts
+1 EvoIII Manifold. Not a problem since I've installed it, though I hear flow is the same as a ported 2g.
1 - 20 of 21 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
