2 MBC's tried, cant boost above 16psi.

The_EE · May 29, 2008

Positive, I brought the whole system up to 22psi and it held fine, all my leaks have been taken care of. I had a couple pin holes pop up on my piping in the welds and took care of those with some JB Weld, they were nothing serious. I think they say its good for 100psi or something like that.

The_EE · May 30, 2008

Boosting 21 psi, still some minor adjustment, OMFG the car feels good. Oh so boostalitious!

Also, degreed the cams today... listen to the mother fucking lope bitches!

Johnnie929 · May 30, 2008

Did you rice out your laptop?

The_EE · May 30, 2008

Johnnie929 said:
Did you rice out your laptop?

Everything on the laptop, except for the tien springs, is in the car. I had a little emergency that stopped me from buying the springs the day before I was going to order them.

Better to have the stickers on the laptop than the car. The laptop is only used for DSMLink as it is.

Johnnie929 · May 30, 2008

Correct! Better on the laptop! And that is one bad ass lope!

The_EE · May 30, 2008

Compared to the video I posted from yesterday a little farther up in the thread, damn right. Hehe

Car sounds beefy as funk.

The_EE · May 30, 2008

Johnnie929 said:
Correct! Better on the laptop! And that is one bad ass lope!

I ran out of room on the laptop for the stickers hehe.

HOT97ECLIPSEGSX · May 30, 2008

That is a different car, sir.

Sick!

Johnnie929 · May 31, 2008

Did you find out what your popping sound was?

The_EE · May 31, 2008

No.

I checked the rear end, all the bolts for the rear end, for the brakes, checked the drive shaft and nothing, everything appears normal. I was going to check the front end today but I fell asleep for 6 hours in the recliner with the AC and a fan on. I didnt get home until 1:30am this morning and was up about 5:30am.

I heard the sound one time yesterday when I had my window down and that didnt help at all. I did not hear it at all after the track. Ill get to checking it out more tomorrow.

Could be exhuast hitting something since I do have to bring it forward about 1/4 inch with the o2 housing I have. Could be a mount issue too.. I am going to fully go over the front end tomorrow.

n0rthendtr00per · Jun 1, 2008

Pretty Bitching man. I need to get a bigger turbo so mine can sound that kickass

The_EE · Jun 1, 2008

I cant hear it on the videos, I wish I could watch myself race from outside the car hehe. Is it pretty loud?

MyBoostedGST · Jun 1, 2008

Balla' ass laptop. Thats what I use in my room. Us Poor college kids cant afford nice computers.

HOT97ECLIPSEGSX · Jun 1, 2008

The_EE said:
I cant hear it on the videos, I wish I could watch myself race from outside the car hehe. Is it pretty loud?

Yes, it's loud. I wouldn't say it's TOO loud by any means...we heard enough V8s running open headers to scare bunnies 100 miles away.

The_EE · Jun 1, 2008

MyBoostedGST said:
Balla' ass laptop. Thats what I use in my room. Us Poor college kids cant afford nice computers.

I think I paid $300 almost 2 years ago for the laptop so its done me well so far.

The_EE · Jun 30, 2008

Well, I think I may have found my popping sound. I decided to pull the last section of my exhaust off to see what my car sounds like with a straight 3 inch no muffler, just a couple resonators. While doing that I found a little dent on the heat shield for the exhaust under the car, could have been the torque of the engine causing the mount to hit the shield. I will know Soon enough.

2 MBC's tried, cant boost above 16psi.

The_EE

The_EE

Johnnie929

The_EE

Johnnie929

The_EE

The_EE

HOT97ECLIPSEGSX

Johnnie929

The_EE

n0rthendtr00per

The_EE

MyBoostedGST

HOT97ECLIPSEGSX

The_EE

The_EE

Top Contributors this Month

Recommended Communities