My 92 talon race car build

lilredeclipse · Apr 1, 2009

Very nice. It is coming along well! The trans and transfer case should drop it down some. Plus the fluids that still need to go in. How much did you take out of the front?

destroydsm · Apr 2, 2009

Yea it will go down some i hope. I def need coilovers thought.

Anyways i ordered some random stuff i need for the intercooler pipeing..... couplers, aluminum elbow to weld to compressor housing, bov flange, Q45 throttle body. So that will take care of all the piping/etc.

Also my income return finally arived, so now i can pay Dogbox, And get my trans back soon. Also got a fidenza flywheel, and shopping around for an act 2900 and 6- puck. AND NO IM NOT GETTING A TWIN DISK! Im too poor for that shit!

Dont ferget its a backyard budget build!

fanaticdsm-er · Apr 2, 2009

LOL budget goes out the window when your getting a dogbox. BUt i guess theres no other way to really get that power to the ground reliably. Cant wait for finished results bro.

lilredeclipse · Apr 2, 2009

Back yard budgets normally turn into full out I'm flat broke buy my extra parts builds.

I love it though Good work man!

dsm_roller · Apr 2, 2009

bookmarking

DSMLIFESTYLE · Apr 2, 2009

Very impressive build I must say, Can't to finish school and start on mine

turbosteve · Apr 2, 2009

fanaticdsm-er said:
LOL budget goes out the window when your getting a dogbox. BUt i guess theres no other way to really get that power to the ground reliably. Cant wait for finished results bro.

Hes not getting a DOG engagement box hes getting a dogbox racing built trans. Which gives you the same upgrades as other companies, but dosent ream out your asshole, plus there local to us.

4g64fiero · Apr 3, 2009

Where did you get the IC piping? Did you just buy aluminum 6061 from some surplus online store or did you buy if from a specific shop?

I'm trying to do all my piping for under 120$ including 3 sets of 3 inch v bands.

destroydsm · Apr 9, 2009

Ok so im just waiting on my trans to get done, Im going with 2nd, 3rd, 4th Double syncros and a welded center diff. Cant wait to get it back!

I got the little parts i have been needing in, bov flange, extra couplers, 90 cast elbow(waiting to get back from welding on my compressor housing) Then getting powder coated 1000 degree black. I also ordered some other colors of powder(semi-gloss black, metallic black, gloss black, and the 1000 degree black)

I order the fittings for my fuel rail, and a tap so i can tap the rail and run the steel -8an fittings.

And lastly i got the Q45 throttle body, cleaned it, painted it black, Then finished mock up of the intercooler pipes. Just need to get the bov flange which came in the mail today, welded on and thats all done! Waiting on the tb gasket as well.

So pretty much all i have left to get is clutch, fuel system, wastegate cams/springs&retainers, and DSMlink. And a bunch of random small thiings Not much more! Just a good 2k in parts and alot of time and hard work!

Anyway pics of the finished piping, and the new TB, a lil later tonight.

By the way thanks for the compliments guys!

destroydsm · Apr 10, 2009

turbosteve · Apr 10, 2009

Looking good Jay. I got your compressor housing to get the turbo back on the car! Soon enough, the trans will be in!

destroydsm · Apr 12, 2009

Ok so i got the compressor back from getting welded, Thanks Steve! I then sandblasted the spray paint off and powder coated it gloss black!

, Came out awesome. I also re did the turbine housing with 1000 degree powder. I did the thermostat housings gloss black. And did the fuel rail gloss black. I tapped the fuel rail and threaded in the an-8 fittings too! Here some pics.

turbosteve · Apr 12, 2009

Not a problem Jay. Thanks for the steering wheel lol. DAAAMN shit looks nice. Yo if i get my turbine housing off, and some other stuff can you do some powdercoating??? Ill buy whatever you need.

destroydsm · Apr 12, 2009

Yea man ill hook it up, the powder is cheap too! I have to order some for my intercooler pipes soon so let me know. Let me know when you get the flange welded on too

.

destroydsm · Apr 13, 2009

More of my powdercoating work...My friend Kevin's T67 In gloss black and a 2g tb elbow.

Black_ bullet · Apr 13, 2009

Man you do some really nice work.

destroydsm · Apr 14, 2009

Black_ bullet said:
Man you do some really nice work.

Thanks man!

destroydsm · Apr 18, 2009

Well today i picked up my trans from dogboxracing!

Like i said before i got the basic rebuild along with double 2nd,3rd,4th, and welded center diff. I got it home and painted it with high temp wrinkle black, look badass! Ill get pics tommaro of it painted.

Also i decide im not going to run wipers, so i pulled th motor out and made this block off plate out of aluminum, then powdercoated it black! Its hard to see because the pics are so dark but it looks good.

DSM4LIFE-AWD · Apr 18, 2009

Wow, nice work Destroydsm ! :rockon:

destroydsm · Apr 19, 2009

Painted trans, and better shot of plate.

My 92 talon race car build

lilredeclipse

destroydsm

fanaticdsm-er

lilredeclipse

dsm_roller

DSMLIFESTYLE

turbosteve

4g64fiero

destroydsm

destroydsm

turbosteve

destroydsm

turbosteve

destroydsm

destroydsm

Black_ bullet

destroydsm

destroydsm

DSM4LIFE-AWD

destroydsm

Top Contributors this Month

Recommended Communities