DSMTalk Forums: Mitsubishi Eclipse, Plymouth Laser, and Eagle Talon Forum banner
21 - 40 of 64 Posts
You wouldn't actually want to take it apart, because when you put it back together the thickness of everything would have changed.
 
You wouldn't actually want to take it apart, because when you put it back together the thickness of everything would have changed.
Only if they powder coated the bore of the brake caliper, which they should know not to do. Other then that, the mounting holes may have be drilled for the bolts to fit, but that's the only issue you could have.
 
Told ya they are the same. I don't care enough to show proof - you all should just take my word for it ;) And you can run some nice OEM 14" Rotors on your DSM. Even better!

-Scott
 
How come you have just have an Evo Brembo and V Brembo just sitting around? Haha.
You mean you guys don't? I have a set of all four of both. :)

Seriously though, I picked up the Evo Brembos for my Talon and the V Brembos are off of my parts car.

Hmm he said 14" rotors for that caliper, are the evo rotors 14 or 13 ?
Evo rotor is 13.1 I believe.

I guess when I get a chance I'll just have to try putting the V caliper on there to see if it works. I'm currently working on getting all three cars out of the garage, though, so some contractors can do some work in here. Also, I'm heading to the track this weekend, so I won't have time then either.
 
21 - 40 of 64 Posts