I was playing with my boost level yesterday turning it up a few lbs . I noticed anything past 15lbs , the CEL would come on for a second and go off when I shift to the next gear while the BOV is releasing pressure . Someone told me it could be detecting knock , but I dont have a logger at the moment to count for that . Any suggestions?
Quick cel flash after shifting
popwar
1 - 18 of 18 Posts
I was playing with my boost level yesterday turning it up a few lbs . I noticed anything past 15lbs , the CEL would come on for a second and go off when I shift to the next gear while the BOV is releasing pressure . Someone told me it could be detecting knock , but I dont have a logger at the moment to count for that . Any suggestions?
Joined
·
614 Posts
I REALLY wanted to tell him that in my previous post, but was to pus to write it :wall:
Joined
·
642 Posts
Have you ever had the ECU reflashed with ECUflash? Because most people who have done that have their CEL act as a knock light. Like me; my CEL will flash if I get more than 3 counts of knock. It could also be a really bad misfire.
The CEL doesnt flash . It just comes on (solid CEL ) after 15lbs til i let off the throttle . Then it goes away .
Joined
·
642 Posts
You previously said you checked it with a logger, what codes were stored?
I need the thread title changed to cel while boosting . I have asked a few people and they said the bcs is throwing the cel for overboost . I looked under the coolant overflow for the bcs but did not see it . I'm guessing its unplugged somewhere . Im going to bypass it and hopefully it will not trip the cel anymore . It doesn't do it all the time,but it is annoying to see that orange cel ha .
Here is a video . It lags , but you get the idea . As soon as I hit 15lbs , it comes on and stays lit until I let off the throttle. http://youtu.be/eLImAohTIcE
1 - 18 of 18 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
