Dejontools intake pipe

DRagtop · Sep 27, 2002

Who's using this, and what's your take on it? If not, what did you replace yours with (pipe between MAS and Turbo intake).

Thanks,

EricGST · Sep 27, 2002

I have the 3" one, it is nice quality and shape

RippinGSX · Sep 27, 2002

I made my own and saved some cash

V8SpankR · Sep 27, 2002

I bought mine with the air bypass tube but I need to install bigger injectors before I use it. So far I really like the pipe and it looks good and matches my upper IC pipe from DSS. My karman readings jumped from 2100hz to 2300hz with the pipe installed. Yeah it cost a bit over $100 but it looks and functions great.

doug · Sep 27, 2002

I have the "stock" size one that fits onto the T-25-- looks good (matches my UICP), easy install. But I don't have any tuning tools, so I don't know if it affected performance or not. I can't tell anything with my butt dyno, but that's not saying much.

cdstalon · Sep 28, 2002

V8SpankR said:
I bought mine with the air bypass tube but I need to install bigger injectors before I use it. So far I really like the pipe and it looks good and matches my upper IC pipe from DSS. My karman readings jumped from 2100hz to 2300hz with the pipe installed. Yeah it cost a bit over $100 but it looks and functions great.

So you are saying that basically the addition of the intake pipe netted you a 200 Hz gain? What are your other mods?

$Big Pimpin$ · Sep 28, 2002

I love mine deffinatley felt a gain as well, and when you compare it to that stock rubber pos you'll be amazed.

V8SpankR · Sep 29, 2002

cdstalon said:
So you are saying that basically the addition of the intake pipe netted you a 200 Hz gain? What are your other mods?

I don't know how my readings went up,maybe with the bigger turbo? I did go from a 16g to an 18g but my MAF already had the lower honeycomb removed. But I did see a consistent gain of 150hz and as high as 230hz.

kris · Sep 30, 2002

RippinGSX said:
I made my own and saved some cash

me too. After seeing some local guys with various dejon intakes i knew I could do better for less cash. Take a look for youselves. If you like them, I've got several other local guys who use my intake and I've got a couple more laying around.

here's my intake webpage

DRagtop · Oct 1, 2002

Whoa..that looks like the attachment on my Vaccum cleaner

Thanks for the feedback, looks like I'm getting the DejonTools..

kris · Oct 1, 2002

yeah, the bov dump tube does resemble the vacuum cleaner stuff but it stays remarkably clean looking over time and is very flexible. It took me a while to find materials that would hold up to abuse and look nice, but to each his own.

Magapaka · Oct 1, 2002

Kris, that looks really nice for a 1G, but how ould you propose putting a 2G MAS on it?

kris · Oct 1, 2002

thanks magapaka. I've got a 2g mas on my car right now. The coupling stretches right over the mas on a 2g though it is a tight fit and on a 1g it just slides right in. I now that it would seem that a round pipe wouldn't work for a rectangular maf but the coupling makes the transition extremely well. The injen pipe is overly complicated, probably contributing to it being over priced.

I'm going to be adding pictures to my intake webpage that show this installed in a 2g, 1g, and my 1g with a 2g mas. I'll post on this thread when the changes are made so you'll know when to check it out.

Dejontools intake pipe

DRagtop

EricGST

RippinGSX

V8SpankR

doug

cdstalon

$Big Pimpin$

V8SpankR

kris

DRagtop

kris

Magapaka

kris

Top Contributors this Month

Recommended Communities