DSMTalk Forums: Mitsubishi Eclipse, Plymouth Laser, and Eagle Talon Forum banner
1 - 10 of 10 Posts

conceyted

· Registered
Joined
·
227 Posts
Discussion starter · #1 ·
i have wheel play in my t25 now... it grinds the housing at 15 vac EVERY time and it does slip/squeak when spooling every so often... what do you think i should do? i can buy a new turbo but i do need to save up alot.... with these hurricanes and no work its killing me with the money situation... should i go with another t25 for like 70 bucks from a junk yard? or should i go with a new turbo... T28 or 16g
basically i would go 16g but the whole hacking kit looks kinda confusing... any opinion would be appreciated. thanks!
 
Discussion starter · #3 ·
basically i want to run 17+ psi... 15 on my t25 is getting old... hehe a 14b wouldnt run too much.... but how hard is it to install?
 
Discussion starter · #5 · (Edited)
well how high can i boost on the t28?

btw check my mods in my profile and tell me what else you think i might need? only thing i can think of is fuel pump or a rewire
 
what exactly are you trying to accomplish?

a car w/ low boost with excellent supporting mods will always out preform a car w/ high boost and minimal supporting mods.

Yes, high boost is good but what is your ultimate goal.

You need to plan your trip before you reach your destination ;)
 
get the BIGT28 like $150 more from fp. thats what im saving up for now
 
i completely understand about the work thing... i work at boomtown... in biloxi and i just blew my head gasket... but anyways if you want the best bang for the buck i would go to a junkyard and pull a 14b or try my hardest to find a 16g in the yard and pull it for like $25 and get the install kit... it'll still be alot cheaper than buying a t28 but i would rather have the fpbigt28 if ya wanna smoke a ls1
 
1 - 10 of 10 Posts