DSMTalk Forums: Mitsubishi Eclipse, Plymouth Laser, and Eagle Talon Forum banner
1 - 20 of 26 Posts

sids

· Registered
Joined
·
147 Posts
Discussion starter · #1 ·
Ordered it from Extreme dimensions for 399 + 100 for SH, had the thing shipped to the philippines too. cost me another 200.

anyway here are some observations and answers to some of the questions I've seen on the board.

1. The thing is f&^%ing tough, its made by GTP aka importfan.com and its the blue class fiberglass. The thing is at least 3/8" thick and there's plenty of material to be grounded/sanded/trimmed to get a good fit.

2. the front is stock height, its not lower by and inch and is the same height as the stock smiley bumper, scome to think of it, all kits need this stock height to be able to bolt to the bottom of the car.

3. it comes primered already but of course some sanding is needed to get it nice and smooth.

4. It comes with diamond wire mesh, which I'll replace because the mesh is too big for me, the holes are about 1.2" wide.

here's the part where i need suggestions

the front bumper has provisions for corner lights like a supra, sicne supras here are even rarer than DSMs, is there another light I can get that will fit?

same goes for the back, the stock reverse lights won't fit, what reverse lights can I get?
 
Discussion starter · #6 ·
well I currently have the half moon reverse lights, are the 97-99 lights round? because the hole is slightly oval, donĂ˝ like how its right next to the license plate, I like the ones where they are far away from the plate.

gee wonder if I could just ask the bodyshop guy to cover it up and stick some other reverse lights at the back, any sugestions?
 
Discussion starter · #10 ·
well it came in a nice cute baby blue color, the bodyshop dude told me that its a primer already, ready to be sanded and painted.

Yep its stock height, well as far as stupid goes, it would just seem half assed if you just have the front.

Nope, I'm the only dude here with the blitz front so I don't have rampant copying problems:D

My friend got the rudora kit, whew :p

everyone here has the crummy smiley bumper
 
Discussion starter · #12 ·
just spoke to the bodyshop guy, turns out the god damn smiley bumper uses 95 lights which are longer and don't fit, anyway he did say that he can mold it from an existing bumper he has.

and he said something about the rear bumer having to take of a support underneath

anyone know about this? I now that the front bumper support needs to be taken out
 
i read up alot on this cause i was planning on buying a 2g way back...as for the 95-96 2g, ur gonna have lots of modding and molding and sanding and other garbage to get it fixed cause, yes, the headlights are slightly longer than those of the 97-99. the back bumper will also have the same problems cause of mounting purposes. i also heard somewhere that the 95-96 tail lights are slighly, slightly different than those of the newer and the back bumper needs modification to fit it.

good luck
 
Discussion starter · #14 ·
well one advantage of bodyshops here is that labor is dirt cheap, but am thinking of just getting the 97 lights, some shop here actually sells them and he's stuck with it for the longest time since there's no one to sell it to:D

my friend's rudor kit went in fine. damn blitz :p

there will be slight modding of the rear bumper since the lip doesn't extend far enough to be bolted, damn god thing i'm having this sponsored
 
Discussion starter · #17 ·
hahaha, paid a visit today and looks like i don;t need 97-99 lights, here's what the bodyshop dudes did

<img src="http://www.compass.com.ph/~sca/DSC04333.JPG">

<img src="http://www.compass.com.ph/~sca/DSC04331.JPG">

they ground of the edges of the kit and gonna mold it to the 95-96 lights.

heck not bad for around $40 work, all in fitting grinding and molding
 
I completely wrecked my front end yesterday, so I'm gonna buy the blitz kit and see how bad it looks with just the front end. If it does look like crap, I'll just get the rest of the kit. Good thing is my brother does autobody so I can get the labor for free :D
 
I have a 95 GST and the blitz front fit perfectly fine with the Projectors i had when my car was white. I went and upgraded to a 97+ stock body kit and everything bolts up just fine. I would suggest just getting the stock 97+ headlights as everything will look/fit better. Projectors dont light up for shit at night.

Good luck

my_gst95
 
1 - 20 of 26 Posts