I know, I know I'll probably get a few "Why the HECK..." and "Just eliminate the BCS..." comments, but PLEASE humor me on this one. I'm getting a Galant in ~1 month and am looking to keep it as stock appearing as possible. This includes keeping the stock airbox, BCS, vacuum lines, etc. So, when I put on the Hallman sitting on my desk should I hook it up BEFORE or AFTER the hose going to the BCS.
(Snagged this image off of Taboo's site; if that was a no-no just delete the link)
http://www.taboospeedshop.com/emissions.htm
On the top (Before) image, I'm wondering whether to put the boost controller in the "B" line or in the "W" line.
Currently I'm thinking the "W" line after the BCS, but my thoughts have been known to change on a whim
Again, if you're just going to tell me to eliminate the BCS or tap off of the BOV line don't bother posting. I found that tapping off of the BOV line for the boost controller resulted in varying boost levels and inaccurate BOV operation due to the two items "fighting" for boost/vacuum (although, this was with an electronic unit). The BCS stays for both stock appearance and semi-safety. Any help would be great y'all...
(Snagged this image off of Taboo's site; if that was a no-no just delete the link)
http://www.taboospeedshop.com/emissions.htm
On the top (Before) image, I'm wondering whether to put the boost controller in the "B" line or in the "W" line.
Currently I'm thinking the "W" line after the BCS, but my thoughts have been known to change on a whim
Again, if you're just going to tell me to eliminate the BCS or tap off of the BOV line don't bother posting. I found that tapping off of the BOV line for the boost controller resulted in varying boost levels and inaccurate BOV operation due to the two items "fighting" for boost/vacuum (although, this was with an electronic unit). The BCS stays for both stock appearance and semi-safety. Any help would be great y'all...
