you guys will probable kick my ass when I tell you what is going on with my dash... Everything other than the obvious(deck gauges, etc...) cost me about $40!!!
From what I hear you cannot use a laptop screen for display you would need to get a separate video driver that is $$$.
The monitor I used is a medical monitor made by Marshall USA(yes the same guys who make guitar amps etc..)
The TFT LCD screen was a raw screen, I trimmed it up with a aluminum picture frame from Wal-Mart $2.87. Then I mounted it up on the motorized tracks (also homemade) $1.00 It rises out of dash.
The switches.... there are many swithces....
In the carbon strip to the left of the AFC are... top one is for the main power for the LCD screen, entertainment system and motor for rising screen.
Will allow operation of entertainment system in the acc position.
Second switch is main power for Eq, and other sound processing stuff only operated on the on position because of battery draw.
The blue thing is an AFC, the deck is a JVC 909, with RCA input.
The cluster of LEDs in A/C positon is a torn apart and redone Proform shift light.
There is a small switch near change holder that you can't really see that controls the monitor up or down position DPDT.
The red button on shifter is a momentary switch for intercooler sprayer, there is also another matching button not in the pic that sits in the empty button position (headlight up/down) it is a OBD code reader when I press the button it will tell me trouble code through a series of beeps.
The thing beside my AFC.... I will let you guys think what you want to think I can't give aways all my secrets....