Has anybody modified their Autometer a/f guage to only read at WOT? I want the LED's to read from .80 to 1.00 volts, but can't seem to get into the guage without breaking something. If anybody has done this and would like to share their know-how... I would be very gratefull. Or even point me in the right direction to learn about how to modify the circuitry. Thank you much
a/f guage modification
chromegsx
1 - 3 of 3 Posts
Has anybody modified their Autometer a/f guage to only read at WOT? I want the LED's to read from .80 to 1.00 volts, but can't seem to get into the guage without breaking something. If anybody has done this and would like to share their know-how... I would be very gratefull. Or even point me in the right direction to learn about how to modify the circuitry. Thank you much
i've just heard that you can buy them so that they read from .8 to 1 volt for instance. I also haven't seen any instructions on how to do it though...
I would just go to radio shake and get one of there multimeters and then read the value out digitaly. It is better then having flashing lights anyway...
I would just go to radio shake and get one of there multimeters and then read the value out digitaly. It is better then having flashing lights anyway...
http://www.gadgetseller.com <-modifies them for you 
1 - 3 of 3 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
