Ok you might remember me posting this problem a month ago. My car was shifting fine and all of a sudden I get to a red light and the car won`t go into gear. After pumping the bejesus out of the pedal I finally got it home. I looked under the car and the pushrod (from the slave cylinder) came loose from the clutch fork. I put it back into place and still no go. I bled the clutch several times, still nothing. But if you pumped the pedal you could get it in gear. The Master Cylinder is new so I replaced the Slave Cylinder. Still no go. There is a lound squeek coming from the clutch plate area when you push the pedal. Sounds like a sqeeky door hinge. And now it wont go in gear at all, unless the car is not running. If you put the car in gear and start it while the pedal is pushed the car lurches forward like your starting it without the clutch engaged. My last resort is replacing the clutch. Any ideas? If it is the clutch which one do you recomend. Keep in mind I bought the car for my girl and she is just now learning to drive a standard. I would kind of like a package (new cluth, pressure plate and TOB)
