[n0rthendtr00per]

I got to thinking with all of the internal upgrades and what not. I wonder how many miles do you guys have? I see alot of part outs with built motors with 500-10000 miles or so. Anybody have a built motor with 50K+ miles or so?:dunno:
I'm on 1500 with mine and just wondering.

 

[Don Boosted]

I got to thinking with all of the internal upgrades and what not. I wonder how many miles do you guys have? I see alot of part outs with built motors with 500-10000 miles or so. Anybody have a built motor with 50K+ miles or so?:dunno:
I'm on 1500 with mine and just wondering.

I think I'm at 2k. Or maybe 3k. I forgot, it was so long in between driving the damn thing

 

[teamongen]

Gone 200 MILES. Now they are tearing into the head to get it rebuilt again. They did something wrong ( burns KRAZY oil).

 

[4g64fiero]

Gone 200 MILES. Now they are tearing into the head to get it rebuilt again. They did something wrong ( burns KRAZY oil).

Probably didnt polish the valve stems when they put the valve stem seals on.

 

[empie1]

Im on around 10k on a rebuilt 1g block with a 150k + 2g head. Finally got all my parts to swap on my mint 1000 mile 1g head with 264/272 combo.Cant wait to turn my b16g up to 22 psi!

 

[The_EE]

A tad over 600 miles on my motor.

 

[sleepwalkindsm]

I am over 60,000 miles on my 7 bolt, bored .020 with JE pistons and Eagle rods. However most of that is under 15 psi.

 

[Ripper_XX]

Probably didnt polish the valve stems when they put the valve stem seals on.

Is that a requirement when changing the valve stem seals?

 

[smoosh]

Im at 1,000 miles, 4 oil changes now. Running Mobil 1 10w30, yesterday morning when I started it, I heard that valve tick for about 5 seconds. Then it went away. Motor has yet to see 16 psi.

 

[x97dsmx]

Built 420a turbo 85k miles on forged bottom end and stage 2 head .

 

[Cherry95gst]

Roughly 12000 or so on mine. Little bit of lifter tick and your common dsm problems but running strong