Solenoid

I hope this help (A) is connected to the WASTEGATE (B) is connected to the FUEL PRESSURE REGULATOR you need to Tee this line the the FPR (C) is connected to the J PIPE the pipe that is connected to you're turbo and has a vacuum line connected to it and lastly the (D) you don't connect anything on it and make sure that there is nothing blocking this nipple and is facing down when you install the solenoid. Good luck

 

Facing down? mine isn't.. that's maybe why I'm having problems with it

 

Sorry to bring up an old thread, but I have a scary question about my Profec A with a Tial 40mm wastegate.... In the picture above (A) would go to the top of the wastegate (B) goes to the FPR "t" (C) would go to?

My logic says to connect (C) to the sideport of the wastegate since that also does not have a hose , but I want to make sure.

 

actually does this look right...

 

sorry to bring this post back up... but I just got one of these and I am trying to figure it out.

on the posts it said that the connection "B" goes to the FPR, could someone point me out to this on my car? I have a 98 GSX.

thank you.

 

Your FPR is on the end of the fuel rail. Be careful.

What you are going to be involved with is the vacuum lines around it, not the FPR itself.