DSMTalk Forums: Mitsubishi Eclipse, Plymouth Laser, and Eagle Talon Forum banner
1 - 10 of 10 Posts

98eklipseRS

· Registered
Joined
·
3 Posts
Discussion starter · #1 ·
hey all i would like to know how to make my blinkers fast... My boyfriend has it done on his civic, which he did by changing the resistor in the flasher fuse. could you all tell me where or how to do this on my 1998 Eclipse RS.

thanks
 
There's another way to make this work.....just have somebody in a 1993 Dodge Dakota rear-end you doing around 25 mph. My brother accidentaly rear-ended me at this speed WITHOUT damaging my bumper!! I was shocked that there was no damage, and now my left turn signal blinks way faster than the right (short to ground i'm guessing).
 
speed

all you have to do is to go insid the pannel of the trunk and cut the black ( ground) wire coming out of the light bulb socket (go for the middle one like I did and it will be better looking) and then you will have fast relaying tail lights and fast blinking headlights. thats all there is to it. charles
 
Re: speed

blackgsxrcst said:
all you have to do is to go insid the pannel of the trunk and cut the black ( ground) wire coming out of the light bulb socket (go for the middle one like I did and it will be better looking) and then you will have fast relaying tail lights and fast blinking headlights. thats all there is to it. charles
your totally sure? cuz i cut the black wire on the drivers side rear blub the one closest to the middle and nothing changed except that when the blinkers were on they alternated.
 
nope. they don't make any for the front. these have to be placed in the rear taillights. if you buy them you'll see what i am talking about. right now i am working on making a set for civics cause a guy in my club has one so we're looking to see if we can make em work
 
1 - 10 of 10 Posts