[Ilario]

I bought a p/a system, but the speaker it came with is not loud at all, only 15 watts, so i got a bigger speaker. I cant figure out how to wire it all up to the amp.
and the there is a power wire and a ground, and the speaker wire coming out of the p/a box.
here are all the connections on the amp, its a real old one.

 

[Redsand187]

All I could see is the first picture, since imagestation is being gay. So I really don't have a clue as to how you'd do it. But considering that amp as a 30 amp fuse, you probably need a bigger power and ground wite. (I'll see if I can get these stupid pics to load and help you out a little later)

 

[Redsand187]

Okay, I just tried it again, and it worked. Well what I would guess would be the best way to do it would the high level plugs, if you have them. If not you can probably find them pretty cheap, although, I have never priced them because I never use them. Then from the PA system's control box thingy, there should be a output pair of wires that goes to the speaker/horn, splice in the high level plug and run it to your amp. Then from the amp, to your new speaker.

 

[Ilario]

thanks, i will give it a try.

 

[RippinGSX]

So now your gonna go annoy the hell out of people?